| HDFEOSVersion: | HDFEOS_V2.9 |
| Cloud_Optical_Thickness: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Optical Thickness two-channel retrieval using band 7 and either band 1, 2, or 5 units: none valid_range: 0, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Effective_Radius: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Particle Effective Radius two-channel retrieval using band 7 and either band 1, 2, or 5 units: micron valid_range: 0, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Water_Path: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Column Water Path two-band retrieval using band 7 and either band 1, 2, or 5 units: g/m^2 valid_range: 0, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path scale_factor: 1.0000000000000000 add_offset: 0.0000000000000000 |
| Cloud_Effective_Radius_Difference: | Array of 16 bit Integers [Radius_Difference = 0..1][Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Radius_Difference Latitude Longitude long_name: Cloud Particle Effective Radius two-channel retrieval using band 6 and band 20 differenced from band 7 retrieval and either band 1, 2, or 5. Plane 1 of SDS is band 6 - band 7 retrieval, Plane 2 is band 20 - band 7 retrieval. units: micron valid_range: -10000, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Effective_Radius_Difference scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Optical_Thickness_1621: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Optical Thickness two-channel retrieval using band 7 and band 6 units: none valid_range: 0, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness_1621 scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Effective_Radius_1621: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Particle Effective Radius two-channel retrieval using band 7 and band 6 units: micron valid_range: 0, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius_1621 scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Water_Path_1621: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Column Water Path two-band retrieval using band 7 and band 6 units: g/m^2 valid_range: 0, 10000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path_1621 scale_factor: 1.0000000000000000 add_offset: 0.0000000000000000 |
| Cloud_Optical_Thickness_Uncertainty: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Optical Thickness Relative Uncertainty (Percent) units: percent valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness_Uncertainty scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Effective_Radius_Uncertainty: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Effective Particle Radius Relative Uncertainty (Percent) units: percent valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius_Uncertainty scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Water_Path_Uncertainty: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Water Path Relative Uncertainty (Percent) units: percent valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path_Uncertainty scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Optical_Thickness_Uncertainty_1621: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Optical Thickness Relative Uncertainty (Percent) using band 7 and band 6 units: percent valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness_Uncertainty_1621 scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Effective_Radius_Uncertainty_1621: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Effective Particle Radius Relative Uncertainty (Percent) using band 7 and band 6 units: percent valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius_Uncertainty_1621 scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Water_Path_Uncertainty_1621: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Water Path Relative Uncertainty (Percent) using band 7 and band 6 units: percent valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path_Uncertainty_1621 scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Cloud_Phase_Optical_Properties: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Phase Determination Used in Optical Thickness/Effective Radius Retrieval units: none valid_range: 0, 4 _FillValue: 0 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Phase_Optical_Properties scale_factor: 1.0000000000000000 add_offset: 0.0000000000000000 |
| Cloud_Phase_Infrared: | Array of 32 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Phase Infrared units: none valid_range: 0, 6 _FillValue: 127 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Phase_Infrared scale_factor: 1.0000000000000000 add_offset: 0.0000000000000000 |
| Cloud_Quality_Assurance: | Array of 32 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269][QA_Parameter_5km = 0..4] coordinates: Latitude Longitude QA_Parameter_5km long_name: Cloud Quality Assurance at 5km Resolution units: none valid_range: 0, -1 _FillValue: 0 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product description: See MODIS atmosphere QA plan (1 x 1 km Product quality and retrieval processing QA flags) for details _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Quality_Assurance_1km scale_factor: 1.0000000000000000 add_offset: 0.0000000000000000 |
| Cirrus_Reflectance: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cirrus Reflectance units: none valid_range: 0, 8000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cirrus_Reflectance scale_factor: 0.00019999999494757503 add_offset: 0.0000000000000000 |
| Cloud_Top_Pressure: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Top Pressure units: hPa valid_range: 10, 11000 _FillValue: -32768 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Top_Pressure scale_factor: 0.10000000149011612 add_offset: 0.0000000000000000 |
| Cloud_Top_Temperature: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Top Temperature units: K valid_range: 0, 20000 _FillValue: -32768 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Top_Temperature scale_factor: 0.0099999997764825821 add_offset: 149.99999664723873 |
| Cloud_Fraction: | Array of 32 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Cloud Fraction units: none valid_range: 0, 100 _FillValue: 127 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Fraction scale_factor: 0.0099999997764825821 add_offset: 0.0000000000000000 |
| Precipitable_Water_Near_Infrared_Clear: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Total Column Precipitable Water Vapor - Near Infrared Clear Retrieval valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD05_L2.A2000055.0000.051.2010089061335.hdf pge04v04 Water_Vapor_Near_Infrared Quality_Assurance_Near_Infrared pixels w/o 0|3 in two most significant bits of QA_Near_IR byte 0 get _FillValue scale_factor: 0.0010000000474974513 add_offset: 0.0000000000000000 |
| Precipitable_Water_Infrared_Clear: | Array of 16 bit Integers [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Latitude Longitude long_name: Total Column Precipitable Water Vapor - IR Clear Retrieval units: cm valid_range: 0, 20000 _FillValue: -9999 Parameter_Type: Output Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD07_L2.A2000055.0000.005.2010041143937.hdf pge03v5.3.1 Water_Vapor scale_factor: 0.0010000000474974513 add_offset: 0.0000000000000000 |
| Cloud_Mask: | Array of 32 bit Integers [Byte_Segment = 0..0][Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] coordinates: Byte_Segment Latitude Longitude long_name: MODIS Cloud Mask units: none valid_range: 0, -1 _FillValue: 0 Parameter_Type: Output Cell_Along_Swath_Sampling: 4, 2029, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: External MODIS geolocation product description: Bit fields within each byte are numbered from the left: 7, 6, 5, 4, 3, 2, 1, 0. The left-most bit (bit 7) is the most significant bit. The right-most bit (bit 0) is the least significant bit. bit field Description Key --------- ----------- --- 0 Cloud Mask Flag 0 = Not determined 1 = Determined 2, 1 Unobstructed FOV Quality Flag 00 = Cloudy 01 = Uncertain 10 = Probably Clear 11 = Confident Clear PROCESSING PATH --------------- 3 Day or Night Path 0 = Night / 1 = Day 4 Sunglint Path 0 = Yes / 1 = No 5 Snow/Ice Background Path 0 = Yes / 1 = No 7, 6 Land or Water Path 00 = Water 01 = Coastal 10 = Desert 11 = Land _1_km_to_5_km_subsampling_description: Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used. source_info: MOD35_L2.A2000055.0000.005.2010041143920.hdf pge03v5.3.1 Cloud_Mask scale_factor: 1.0000000000000000 add_offset: 0.0000000000000000 |
| Latitude: | Array of 32 bit Reals [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] units: degrees_north long_name: Geodetic Latitude at 5km Resolution valid_range: -9000, 9000 Parameter_Type: MODIS Input Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Latitude _FillValue: -32768 |
| Longitude: | Array of 32 bit Reals [Cell_Along_Swath_5km = 0..405][Cell_Across_Swath_5km = 0..269] units: degrees_east long_name: Geodetic Longitude at 5km Resolution valid_range: -18000, 18000 Parameter_Type: MODIS Input Cell_Along_Swath_Sampling: 3, 2028, 5 Cell_Across_Swath_Sampling: 3, 1348, 5 Geolocation_Pointer: Internal geolocation arrays source_info: MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Longitude _FillValue: -32768 |
| Radius_Difference: | Array of 32 bit Integers [Radius_Difference = 0..1] units: level long_name: Radius_Difference(fake) |
| QA_Parameter_5km: | Array of 32 bit Integers [QA_Parameter_5km = 0..4] units: level long_name: QA_Parameter_5km(fake) |
| Byte_Segment: | Array of 32 bit Integers [Byte_Segment = 0..0] units: level long_name: Byte_Segment(fake) |