Attributes { Latitude { String units "degrees_north"; String long_name "Geodetic Latitude at 5km Resolution"; Int16 valid_range -9000, 9000; String Parameter_Type "MODIS Input"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Latitude"; Float32 _FillValue -32768; } Longitude { String units "degrees_east"; String long_name "Geodetic Longitude at 5km Resolution"; Int16 valid_range -18000, 18000; String Parameter_Type "MODIS Input"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Longitude"; Float32 _FillValue -32768; } Radius_Difference { String units "level"; String long_name "Radius_Difference(fake)"; } QA_Parameter_5km { String units "level"; String long_name "QA_Parameter_5km(fake)"; } Byte_Segment { String units "level"; String long_name "Byte_Segment(fake)"; } Cloud_Optical_Thickness { String coordinates "Latitude Longitude"; String long_name "Cloud Optical Thickness two-channel retrieval using band 7 and either band 1, 2, or 5"; String units "none"; Int16 valid_range 0, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Effective_Radius { String coordinates "Latitude Longitude"; String long_name "Cloud Particle Effective Radius two-channel retrieval using band 7 and either band 1, 2, or 5"; String units "micron"; Int16 valid_range 0, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Water_Path { String coordinates "Latitude Longitude"; String long_name "Column Water Path two-band retrieval using band 7 and either band 1, 2, or 5"; String units "g/m^2"; Int16 valid_range 0, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path"; Float64 scale_factor 1.0000000000000000; Float64 add_offset 0.0000000000000000; } Cloud_Effective_Radius_Difference { String coordinates "Radius_Difference Latitude Longitude"; String long_name "Cloud Particle Effective Radius two-channel retrieval using band 6 and band 20 differenced from band 7 retrieval and either band 1, 2, or 5. Plane 1 of SDS is band 6 - band 7 retrieval, Plane 2 is band 20 - band 7 retrieval."; String units "micron"; Int16 valid_range -10000, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Effective_Radius_Difference"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Optical_Thickness_1621 { String coordinates "Latitude Longitude"; String long_name "Cloud Optical Thickness two-channel retrieval using band 7 and band 6"; String units "none"; Int16 valid_range 0, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness_1621"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Effective_Radius_1621 { String coordinates "Latitude Longitude"; String long_name "Cloud Particle Effective Radius two-channel retrieval using band 7 and band 6"; String units "micron"; Int16 valid_range 0, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius_1621"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Water_Path_1621 { String coordinates "Latitude Longitude"; String long_name "Column Water Path two-band retrieval using band 7 and band 6"; String units "g/m^2"; Int16 valid_range 0, 10000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path_1621"; Float64 scale_factor 1.0000000000000000; Float64 add_offset 0.0000000000000000; } Cloud_Optical_Thickness_Uncertainty { String coordinates "Latitude Longitude"; String long_name "Cloud Optical Thickness Relative Uncertainty (Percent)"; String units "percent"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness_Uncertainty"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Effective_Radius_Uncertainty { String coordinates "Latitude Longitude"; String long_name "Cloud Effective Particle Radius Relative Uncertainty (Percent)"; String units "percent"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius_Uncertainty"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Water_Path_Uncertainty { String coordinates "Latitude Longitude"; String long_name "Cloud Water Path Relative Uncertainty (Percent)"; String units "percent"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path_Uncertainty"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Optical_Thickness_Uncertainty_1621 { String coordinates "Latitude Longitude"; String long_name "Cloud Optical Thickness Relative Uncertainty (Percent) using band 7 and band 6"; String units "percent"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Optical_Thickness_Uncertainty_1621"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Effective_Radius_Uncertainty_1621 { String coordinates "Latitude Longitude"; String long_name "Cloud Effective Particle Radius Relative Uncertainty (Percent) using band 7 and band 6"; String units "percent"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Effective_Radius_Uncertainty_1621"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Water_Path_Uncertainty_1621 { String coordinates "Latitude Longitude"; String long_name "Cloud Water Path Relative Uncertainty (Percent) using band 7 and band 6"; String units "percent"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Water_Path_Uncertainty_1621"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Cloud_Phase_Optical_Properties { String coordinates "Latitude Longitude"; String long_name "Cloud Phase Determination Used in Optical Thickness/Effective Radius Retrieval"; String units "none"; Int16 valid_range 0, 4; Int16 _FillValue 0; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Phase_Optical_Properties"; Float64 scale_factor 1.0000000000000000; Float64 add_offset 0.0000000000000000; } Cloud_Phase_Infrared { String coordinates "Latitude Longitude"; String long_name "Cloud Phase Infrared"; String units "none"; Int32 valid_range 0, 6; Int32 _FillValue 127; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Phase_Infrared"; Float64 scale_factor 1.0000000000000000; Float64 add_offset 0.0000000000000000; } Cloud_Quality_Assurance { String coordinates "Latitude Longitude QA_Parameter_5km"; String long_name "Cloud Quality Assurance at 5km Resolution"; String units "none"; Int32 valid_range 0, -1; Int32 _FillValue 0; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String description "See MODIS atmosphere QA plan (1 x 1 km Product quality and retrieval processing QA flags) for details"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Quality_Assurance_1km"; Float64 scale_factor 1.0000000000000000; Float64 add_offset 0.0000000000000000; } Cirrus_Reflectance { String coordinates "Latitude Longitude"; String long_name "Cirrus Reflectance"; String units "none"; Int16 valid_range 0, 8000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cirrus_Reflectance"; Float64 scale_factor 0.00019999999494757503; Float64 add_offset 0.0000000000000000; } Cloud_Top_Pressure { String coordinates "Latitude Longitude"; String long_name "Cloud Top Pressure"; String units "hPa"; Int16 valid_range 10, 11000; Int16 _FillValue -32768; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Top_Pressure"; Float64 scale_factor 0.10000000149011612; Float64 add_offset 0.0000000000000000; } Cloud_Top_Temperature { String coordinates "Latitude Longitude"; String long_name "Cloud Top Temperature"; String units "K"; Int16 valid_range 0, 20000; Int16 _FillValue -32768; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Top_Temperature"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 149.99999664723873; } Cloud_Fraction { String coordinates "Latitude Longitude"; String long_name "Cloud Fraction"; String units "none"; Int32 valid_range 0, 100; Int32 _FillValue 127; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD06_L2.A2000055.0000.051.2010089061456.hdf pge06v06 Cloud_Fraction"; Float64 scale_factor 0.0099999997764825821; Float64 add_offset 0.0000000000000000; } Precipitable_Water_Near_Infrared_Clear { String coordinates "Latitude Longitude"; String long_name "Total Column Precipitable Water Vapor - Near Infrared Clear Retrieval"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD05_L2.A2000055.0000.051.2010089061335.hdf pge04v04 Water_Vapor_Near_Infrared Quality_Assurance_Near_Infrared pixels w/o 0|3 in two most significant bits of QA_Near_IR byte 0 get _FillValue"; Float64 scale_factor 0.0010000000474974513; Float64 add_offset 0.0000000000000000; } Precipitable_Water_Infrared_Clear { String coordinates "Latitude Longitude"; String long_name "Total Column Precipitable Water Vapor - IR Clear Retrieval"; String units "cm"; Int16 valid_range 0, 20000; Int16 _FillValue -9999; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 3, 2028, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "Internal geolocation arrays"; String source_info " MOD07_L2.A2000055.0000.005.2010041143937.hdf pge03v5.3.1 Water_Vapor"; Float64 scale_factor 0.0010000000474974513; Float64 add_offset 0.0000000000000000; } Cloud_Mask { String coordinates "Byte_Segment Latitude Longitude"; String long_name "MODIS Cloud Mask"; String units "none"; Int32 valid_range 0, -1; Int32 _FillValue 0; String Parameter_Type "Output"; Int32 Cell_Along_Swath_Sampling 4, 2029, 5; Int32 Cell_Across_Swath_Sampling 3, 1348, 5; String Geolocation_Pointer "External MODIS geolocation product"; String description " Bit fields within each byte are numbered from the left: 7, 6, 5, 4, 3, 2, 1, 0. The left-most bit (bit 7) is the most significant bit. The right-most bit (bit 0) is the least significant bit. bit field Description Key --------- ----------- --- 0 Cloud Mask Flag 0 = Not determined 1 = Determined 2, 1 Unobstructed FOV Quality Flag 00 = Cloudy 01 = Uncertain 10 = Probably Clear 11 = Confident Clear PROCESSING PATH --------------- 3 Day or Night Path 0 = Night / 1 = Day 4 Sunglint Path 0 = Yes / 1 = No 5 Snow/Ice Background Path 0 = Yes / 1 = No 7, 6 Land or Water Path 00 = Water 01 = Coastal 10 = Desert 11 = Land "; String _1_km_to_5_km_subsampling_description "Each value in this dataset does not represent an average of properties over a 5 x 5 km grid box, but rather a single sample from within each 5 km box. Normally, pixels in across-track rows 4 and 9 (counting in the direction of increasing scan number) out of every set of 10 rows are used for subsampling the 1 km retrievals to a 5 km resolution. If the array contents are determined to be all fill values after selecting the default pixel subset (e.g., from failed detectors), a different pair of pixel rows is used to perform the subsampling. Note that 5 km data sets are centered on rows 3 and 8; the default sampling choice of 4 and 9 is for better data quality and avoidance of dead detectors on Aqua. The row pair used for the 1 km sample is always given by the first number and last digit of the second number of the attribute Cell_Along_Swath_Sampling. The attribute Cell_Across_Swath_Sampling indicates that columns 3 and 8 are used, as they always are, for across-track sampling. Again these values are to be interpreted counting in the direction of the scan, from 1 through 10 inclusively. For example, if the value of attribute Cell_Along_Swath_Sampling is 3, 2028, 5, then the third and eighth pixel rows were used for subsampling. A value of 4, 2029, 5 indicates that the default fourth and ninth rows pair was used."; String source_info " MOD35_L2.A2000055.0000.005.2010041143920.hdf pge03v5.3.1 Cloud_Mask"; Float64 scale_factor 1.0000000000000000; Float64 add_offset 0.0000000000000000; } CoreMetadata { INVENTORYMETADATA { String GROUPTYPE "MASTERGROUP"; ECSDATAGRANULE { LOCALGRANULEID { Int32 NUM_VAL 1; String VALUE "\"MODATML2.A2000055.0000.051.2010089061511.hdf\""; } PRODUCTIONDATETIME { Int32 NUM_VAL 1; String VALUE "\"2010-03-30T06:15:11.000Z\""; } DAYNIGHTFLAG { Int32 NUM_VAL 1; String VALUE "\"Night\""; } REPROCESSINGACTUAL { Int32 NUM_VAL 1; String VALUE "\"processed once\""; } LOCALVERSIONID { Int32 NUM_VAL 1; String VALUE "\"051\""; } REPROCESSINGPLANNED { Int32 NUM_VAL 1; String VALUE "\"further update is anticipated\""; } } MEASUREDPARAMETER { MEASUREDPARAMETERCONTAINER { String CLASS "\"1\""; QAFLAGS { String CLASS "\"1\""; SCIENCEQUALITYFLAG { Int32 NUM_VAL 1; String VALUE "\"Not Investigated\""; String CLASS "\"1\""; } AUTOMATICQUALITYFLAGEXPLANATION { Int32 NUM_VAL 1; String CLASS "\"1\""; String VALUE "\"Passed: >10% useable; Failed: <10% useable\""; } AUTOMATICQUALITYFLAG { Int32 NUM_VAL 1; String CLASS "\"1\""; String VALUE "\"Failed\""; } SCIENCEQUALITYFLAGEXPLANATION { Int32 NUM_VAL 1; String VALUE "\"See http://modis-atmos.gsfc.nasa.gov/validation.html for more details on MODIS Atmosphere data quality.\""; String CLASS "\"1\""; } } QASTATS { String CLASS "\"1\""; QAPERCENTMISSINGDATA { Int32 NUM_VAL 1; String CLASS "\"1\""; Int32 VALUE 100; } } PARAMETERNAME { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"Cloud_Top_Pressure\""; } } } ORBITCALCULATEDSPATIALDOMAIN { ORBITCALCULATEDSPATIALDOMAINCONTAINER { String CLASS "\"1\""; EQUATORCROSSINGDATE { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"2000-02-24\""; } EQUATORCROSSINGTIME { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"00:31:07.777131\""; } ORBITNUMBER { String CLASS "\"1\""; Int32 NUM_VAL 1; Int32 VALUE 985; } EQUATORCROSSINGLONGITUDE { String CLASS "\"1\""; Int32 NUM_VAL 1; Float64 VALUE 153.398184366839; } } } COLLECTIONDESCRIPTIONCLASS { VERSIONID { Int32 NUM_VAL 1; Int32 VALUE 51; } SHORTNAME { Int32 NUM_VAL 1; String VALUE "\"MODATML2\""; } } INPUTGRANULE { INPUTPOINTER { Int32 NUM_VAL 30; String VALUE "\"MOD03.A2000055.0000.005.2010029175839.hdf\"", "\"MOD05_L2.A2000055.0000.051.2010089061335.hdf\"", "\"MOD06_L2.A2000055.0000.051.2010089061456.hdf\"", "\"MOD07_L2.A2000055.0000.005.2010041143937.hdf\"", "\"MOD35_L2.A2000055.0000.005.2010041143920.hdf\""; } } SPATIALDOMAINCONTAINER { HORIZONTALSPATIALDOMAINCONTAINER { BOUNDINGRECTANGLE { EASTBOUNDINGCOORDINATE { Int32 NUM_VAL 1; Float64 VALUE 7.20060781056674; } WESTBOUNDINGCOORDINATE { Int32 NUM_VAL 1; Float64 VALUE -95.0350314316812; } SOUTHBOUNDINGCOORDINATE { Int32 NUM_VAL 1; Float64 VALUE 60.2309010578301; } NORTHBOUNDINGCOORDINATE { Int32 NUM_VAL 1; Float64 VALUE 84.9641340962988; } } } } RANGEDATETIME { RANGEENDINGDATE { Int32 NUM_VAL 1; String VALUE "\"2000-02-24\""; } RANGEENDINGTIME { Int32 NUM_VAL 1; String VALUE "\"00:05:00.000000\""; } RANGEBEGINNINGDATE { Int32 NUM_VAL 1; String VALUE "\"2000-02-24\""; } RANGEBEGINNINGTIME { Int32 NUM_VAL 1; String VALUE "\"00:00:00.000000\""; } } PGEVERSIONCLASS { PGEVERSION { Int32 NUM_VAL 1; String VALUE "\"51.0.1\""; } } ANCILLARYINPUTGRANULE { ANCILLARYINPUTGRANULECONTAINER { String CLASS "\"1\""; ANCILLARYINPUTPOINTER { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"MOD03.A2000055.0000.005.2010029175839.hdf\""; } ANCILLARYINPUTTYPE { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"Geolocation\""; } } } ASSOCIATEDPLATFORMINSTRUMENTSENSOR { ASSOCIATEDPLATFORMINSTRUMENTSENSORCONTAINER { String CLASS "\"1\""; ASSOCIATEDSENSORSHORTNAME { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"MODIS\""; } ASSOCIATEDPLATFORMSHORTNAME { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"Terra\""; } ASSOCIATEDINSTRUMENTSHORTNAME { String CLASS "\"1\""; Int32 NUM_VAL 1; String VALUE "\"MODIS\""; } } } ADDITIONALATTRIBUTES { ADDITIONALATTRIBUTESCONTAINER { String CLASS "\"1\"", "\"2\"", "\"3\"", "\"4\"", "\"5\"", "\"6\"", "\"7\"", "\"8\"", "\"9\"", "\"10\"", "\"11\"", "\"12\"", "\"13\"", "\"14\"", "\"15\"", "\"16\"", "\"17\"", "\"18\"", "\"19\"", "\"20\"", "\"21\"", "\"22\"", "\"23\"", "\"24\"", "\"25\"", "\"26\"", "\"27\""; ADDITIONALATTRIBUTENAME { String CLASS "\"1\"", "\"2\"", "\"3\"", "\"4\"", "\"5\"", "\"6\"", "\"7\"", "\"8\"", "\"9\"", "\"10\"", "\"11\"", "\"12\"", "\"13\"", "\"14\"", "\"15\"", "\"16\"", "\"17\"", "\"18\"", "\"19\"", "\"20\"", "\"21\"", "\"22\"", "\"23\"", "\"24\"", "\"25\"", "\"26\"", "\"27\""; Int32 NUM_VAL 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1; String VALUE "\"SuccessfulRetrievalPct\"", "\"DayProcessedPct\"", "\"NightProcessedPct\"", "\"LandProcessedPct\"", "\"WaterProcessedPct\"", "\"Snow_IceSurfaceProcessedPct\"", "\"ShadowFoundPct\"", "\"SunglintProcessedPct\"", "\"NonCloudObstructionFoundPct\"", "\"MaxSolarZenithAngle\"", "\"MinSolarZenithAngle\"", "\"VeryHighConfidentClearPct\"", "\"HighConfidentClearPct\"", "\"UncertainConfidentClearPct\"", "\"LowConfidentClearPct\"", "\"ThinCirrusSolarFoundPct\"", "\"ThinCirrusIR_FoundPct\"", "\"SuccessfulRetrievalPct_Land\"", "\"SuccessfulRetrievalPct_Ocean\"", "\"SuccessfulRetrievalPct_NIR\"", "\"SuccessfulRetrievalPct_IR\"", "\"SuccessCloudTopPropRtrPct_IR\"", "\"SuccessCloudPhaseRtrPct_IR\"", "\"SuccessCloudOptPropRtrPct_VIS\"", "\"CloudCoverFractionPct_VIS\"", "\"WaterCloudDetectedPct_VIS\"", "\"IceCloudDetectedPct_VIS\""; } INFORMATIONCONTENT { String CLASS "\"1\"", "\"2\"", "\"3\"", "\"4\"", "\"5\"", "\"6\"", "\"7\"", "\"8\"", "\"9\"", "\"10\"", "\"11\"", "\"12\"", "\"13\"", "\"14\"", "\"15\"", "\"16\"", "\"17\"", "\"18\"", "\"19\"", "\"20\"", "\"21\"", "\"22\"", "\"23\"", "\"24\"", "\"25\"", "\"26\"", "\"27\""; PARAMETERVALUE { Int32 NUM_VAL 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1; String CLASS "\"1\"", "\"2\"", "\"3\"", "\"4\"", "\"5\"", "\"6\"", "\"7\"", "\"8\"", "\"9\"", "\"10\"", "\"11\"", "\"12\"", "\"13\"", "\"14\"", "\"15\"", "\"16\"", "\"17\"", "\"18\"", "\"19\"", "\"20\"", "\"21\"", "\"22\"", "\"23\"", "\"24\"", "\"25\"", "\"26\"", "\"27\""; String VALUE "\" 0.49\"", "\" 0.00\"", "\" 0.49\"", "\" 0.15\"", "\" 0.34\"", "\" 0.33\"", "\" 0.00\"", "\" 0.00\"", "\" 0.00\"", "\" 122.06\"", "\" 96.87\"", "\" 0.00\"", "\" 0.00\"", "\" 0.00\"", "\" 0.49\"", "\" 0.00\"", "\" 0.02\"", "\" 0.00\"", "\" 0.00\"", "\" 0.00\"", "\" 0.00\"", "\" 0.27\"", "\" 0.49\"", "\" 0.00\"", "\" 0.00\"", "\" 0.00\"", "\" 0.00\""; } } } } } } ArchiveMetadata { ARCHIVEDMETADATA { String GROUPTYPE "MASTERGROUP"; PROCESSINGENVIRONMENT { Int32 NUM_VAL 1; String VALUE "\"Linux minion5197 2.6.8.1-26mdksmp #1 SMP Mon Nov 28 12:40:04 MST 2005 i686 Intel(R) Xeon(TM) CPU 2.80GHz unknown GNU/Linux\""; } LONGNAME { Int32 NUM_VAL 1; String VALUE "\"MODIS/Terra Aerosol, Cloud and Water Vapor Subset 5-Min L2 Swath 5km and 10km\""; } INSTRUMENTNAME { Int32 NUM_VAL 1; String VALUE "\"Moderate Resolution Imaging Spectroradiometer\""; } GPOLYGON { GPOLYGONCONTAINER { String CLASS "\"1\""; GRING { String CLASS "\"1\""; EXCLUSIONGRINGFLAG { Int32 NUM_VAL 1; String CLASS "\"1\""; String VALUE "\"N\""; } } GRINGPOINT { String CLASS "\"1\""; GRINGPOINTLONGITUDE { Int32 NUM_VAL 4; String CLASS "\"1\""; Float64 VALUE -9.77486181186215, -57.4984863298771, -95.2529373302608, 9.0088942271329; } GRINGPOINTLATITUDE { Int32 NUM_VAL 4; String CLASS "\"1\""; Float64 VALUE 66.9099424390187, 60.228237639177, 70.238999960889, 84.7905572705212; } GRINGPOINTSEQUENCENO { Int32 NUM_VAL 4; String CLASS "\"1\""; Float64 VALUE 1, 2, 3, 4; } } } } DESCRREVISION { Int32 NUM_VAL 1; String VALUE "\"5.1\""; } PRODUCTIONHISTORY { Int32 NUM_VAL 1; String VALUE "\"PGE83:51.0.1\""; } } } HDF_GLOBAL { String HDFEOSVersion "HDFEOS_V2.9"; } }